How Much To Change A Shower Pull Cord? (Electrician Opinion)

How much should it cost to change a shower pull cord

I know that when my shower pull cord breaks, it can be a pain to have to replace it. I have had to do this a few times and it can be frustrating, especially if you don’t know how much it should cost.

It is difficult to give a definitive answer without knowing the specifics of the shower pull cord, such as its make and model. However, a general guide would be to expect to pay between $10 and $20 for the replacement cord.

If you are looking for a more accurate answer, I will give you the necessary advice like a professional electrician. Read on to learn more!

When is it time to replace a shower pull cord?

replace a shower pull cord

Shower pull cords can last anywhere from one to five years, depending on the quality of the cord and how often it is used. If you notice that your shower pull cord is fraying or has any other visible damage, it is time to replace it.

Additionally, if the cord stops working properly or becomes difficult to pull, it is time for a replacement.

Tools required Equipment / Parts required when replacing shower tension cord

1. Wire Cutters

Wire Cutters

Wire cutters are a necessary tool for shower pull cord replacement because they will be used to cut the old cord.

You will need to purchase a new shower pull cord before you begin the replacement process. Be sure to get a cord that is the same length as the one you are replacing.

2. Screwdriver

A screwdriver is one of the most basic tools in any toolbox, and for good reason. With it, you can do a shower pull cord replacement.

3. Electric tester

Electric tester

An electric tester is a device used to test electrical circuits and wiring. It has two metal probes that are inserted into the circuit to be tested.

When you change the shower tension cord, check it with an electric tester to make sure the new cord is compatible with the electrical system in your home.

4. Needle Nose Pliers

Needle nose pliers are a type of pliers that have a long, thin nose. This type of plier is ideal for gripping and manipulating small objects.

When changing the shower tension cord, you may need to use needle-nose pliers to hold on to the screws or the wire nuts that are used to secure the cord.

What are some common problems with shower pull cords?

 problems with shower pull cords

The shower pull cord is often one of the first places that homeowners notice problems with their shower.

The cord can become loose and disconnected, or it can fray and create a hazardous electrical situation.

One of the most common problems with a shower pull cord is that it becomes loose and begins to sag. This can cause the water to be turned off or on unexpectedly, or it may simply be difficult to use the pull cord to get the desired water flow.

Another common problem is that the pull cord breaks. This can happen if it is pulled too hard, or if it becomes caught on something.

How much should it cost to change a shower pull cord?

How much should it cost to change a shower pull cord

It’s not a difficult task to change a shower pull cord, but how much should you expect to pay for the service? Depending on where you live, labor rates will vary.

However, as a general rule of thumb, most homeowners should expect to pay around $50-$75 for this type of job. There may be some additional costs if the electrician needs to purchase new parts or supplies, but this should be included in their quote.

If you’re not comfortable changing the cord yourself, it’s best to hire a professional electrician.

They will have the experience and knowledge to safely and correctly change the cord, so you can avoid any potential hazards.

Is it easy to change a shower tension cord?

Yes, it is easy to change a shower tension cord. You will need some basic tools, like wire cutters and a screwdriver, and you may also need needle nose pliers.

First, cut the old cord using the wire cutters. Then, use the screwdriver to remove the screws that hold the cord in place. Disconnect the wires from the old cord, and then connect the new cord in its place.

Finally, use the electric tester to test the new cord, and then screw it into place.

How To Change A Shower Pull Cord? – Step By Step

Replacing a shower pull cord is a fairly straightforward task, and can be completed in about 10 minutes. Here’s what you’ll need:

  • A new shower pull cord
  • A Phillips head screwdriver
  • A small flat head screwdriver

Now we will show you step by step how to change a shower pull cord.

1. Check the shower pull cord for damage

How To Change A Shower Pull Cord

If the shower pull cord is damaged, you will need to replace it. The easiest way to do this is to cut the old cord off near the shower head and then strip the wires.

You can then twist the wires together and use a wire nut to attach them. Make sure that the wires are tightly attached and that there is no exposed wire.

2. Remove the old shower pull cord

Use a Phillips head screwdriver to remove the screws from the back plate of the shower head. Be careful not to strip the screws. Once the back plate is removed, you will be able to access the shower pull cord.

Pull the cord out of the shower head and then use a small flat head screwdriver to remove the retaining clip. The retaining clip is what holds the cord in place.

3. Install the new shower pull cord

Thread the new shower pull cord through the back plate and then reattach the retaining clip. Make sure that the clip is secure.

Now, screw the back plate back onto the shower head. Be sure to use the same screws that you used to remove the old back plate.

4. Test the new shower pull cord

Before you put everything back together, test the new cord to make sure it works. Pull-on the cord to turn the shower on and off. If it doesn’t work, you may need to adjust the retaining clip.

How important is a shower tension cord in the bathroom?

The shower tension cord is important because it allows you to adjust the water pressure while you are taking a shower.

If the cord is broken or damaged, you may not be able to get the right amount of water pressure, which can make it difficult to shower.

In some cases, you may not be able to turn the shower off if the cord is broken. This can be dangerous because you could end up flooding your bathroom.

What are the benefits of changing a shower pull cord?

There are several benefits of changing a shower pull cord. One is that it can improve the appearance of the shower by replacing a worn or outdated pull cord.

Additionally, a new pull cord can provide a more comfortable grip and make it easier to activate the shower.

Finally, replacing a pull cord can help ensure that the shower is functioning properly and safely.

What are some common mistakes people make when changing a shower pull cord

People often make mistakes when changing a shower pull cord. One common mistake is not disconnecting the power to the shower before beginning the repair.

Another mistake is trying to replace the pull cord without knowing how to properly do it. It’s important to read the instructions carefully and take your time when making this type of repair.

If you’re not comfortable with changing a shower pull cord, it’s best to hire an electrician to do the job for you.

The Summary

Now that you know all of the factors that can influence the cost to replace a shower pull cord, you can better budget for the project.

However, as a general guideline, an electrician will charge between $75 and $150 per hour for this type of work. So, if the job takes two hours or less, you can expect to pay between $150 and $300.

In last I want to say, please be very careful when working with any kind of electrical wiring, and if you are not comfortable doing the work yourself, please hire a licensed professional electrician to do the job for you. Thanks for reading!

Recent Posts